Please use the same currency for adding the item to the Cart.
Your cart is full! You can only add up to 10 items to your cart. To add new items, please remove some existing items.
This Item already exists in your cart.
At Baumalight, we design our attachments to handle heavy mulching, grinding and mowing, and to ensure high performance under heavy use, we supply the best teeth for the job. We offer a large selection of heavy duty fixed, bolt-in, or replaceable teeth for stump grinding, mulching, mowing or cutting. The following page will provide you with more information on the right tooth for your application.
Even high quality teeth need to be replaced in time. To keep you productive, Baumalight offers a free set of 6 replacement teeth with the purchase of every Baumalight Brush Mulcher. The free 6 pack of replacement teeth will match the tooth option you chose with your purchase.
Flail Tooth Style
Flail style teeth, used on Baumalight’s Flail Mower products, are an economic and efficient way to mow grass and beat back heavy vegetation and light to moderate brush. Ideally suited for small carriers, flail teeth provide good cutting performance for light mulching. Both flail teeth are bolt-on replaceable for quick and easy servicing, even in the field. If cutting grass is your goal then the F2000 are your best choice. Upgrade to our F3000 Heavy Blade Teeth and instantly increase your mulching capacity on brush. These upgraded heavy duty blade teeth are 6 mm thick and will allow you to double your brush size mulching capacity without any other equipment adjustments required.
Round Tooth Style
The concave shaped carbide tip of our round style tooth provides aggressive cutting action by chipping the material bit by bit. Part of the secret of their performance is always having a sharp edge to make mulching and cutting easier. These round carbide tipped teeth are 3 teeth in one. Just loosen the lock nut, turn the tooth, tighten and tear back into the brush. It takes only seconds to sharpen the tooth this way and the tooth can be rotated up to three times. This gives you 3 times the wear without replacing the tooth. Round teeth are bolt-on replaceable, making in-field servicing quick and easy without special tools.
Ripper Tooth Style
Ripper style teeth is a general use tooth, offering operators a shredding mulching action. Their v-shaped design makes them less susceptible to impacts with hard objects like stones, making them the better choice when mulching below grade and in fence lines. Ripper teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Planer Tooth Style
The Planer style tooth feeds its appetite for brush bit by bit, taking small bites and providing the most efficient mulching and cutting. Although planer style teeth are efficient, their flat profile make them vulnerable to shattering on impact with rocks and other debris. For that reason, this style of tooth is recommended for cutting applications where efficiency is more important than tooth life. Planer teeth are bolt-on replaceable for quick and easy servicing and replacement even in the field.
Enter equipment model number to find matching teeth.
200 Series Mulcher Flail Tooth
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| F2000 | Flail Blade | .20 | $20$35 | $4.30$5.50 | $35.00 | $40.50 | ||
| D003977 | D-Ring F2000 for hanging Flail Tooth | View Photo | .20 | $20$35 | $3.50$4.35 | $35.00 | $39.35 | |
| D003978 | Clip for hanging Flail Tooth | View Photo | .20 | $20$35 | $3.00$3.55 | $35.00 | $38.55 | |
| D005720 | 1-1/2" x 3/8" Grade 8 course thread bolt | View Photo | .05 | $20$35 | $5.00$8.00 | $35.00 | $43.00 |
6 MM Heavy Flail Blade
*Sold in singles, set of 2 required
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| F3000 | 6 mm Heavy Flail Blade (sold in singles, set of two required) | .80 | $20$35 | $4.44$6.00 | $35.00 | $41.00 | ||
| D003977 | D-Ring F3000 for hanging Flail Tooth | View Photo | .20 | $20$35 | $3.50$4.35 | $35.00 | $39.35 | |
| D003978 | Clip for hanging Flail Tooth | View Photo | .20 | $20$35 | $3.00$3.55 | $35.00 | $38.55 |
700 Series flail mower
Heavy flail blade
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| F7000 | Flail blade for FEB700 (priced as a single blade, need two for a cluster) | .40 | $20$35 | $7.00$6.00 | $35.00 | $41.00 |
By Baumalight
High speed Tooth - Carbide Tipped 3/8" thread (nut not included)
By Green Manufacturing, Inc.
GreenTeeth® - Carbide Tipped 3/8" thread (nut not included)
*GreenTeeth® is a trademarks of Green Manufacturing, Inc.
By Green Manufacturing, Inc.
The unique design of the Wearsharp®allows the tooth to retain a sharp cutting surface, unlike traditional teeth that tend to round over. This provides a consistent cut throughout the life of the tooth, allowing you to maintain a faster sweep speed.
*Wearsharp® is a trademarks of Green Manufacturing, Inc.
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| H3000 | Round High Speed Tooth - Carbid Tipped 3/8" Thread (nut not included) | .20 | $20$35 | $14.00$17.00 | $35.00 | $52.00 | ||
| G3000 | Round GREENTOOTH - Carbide Tipped 3/8" thread (nut not included) | .20 | $20$35 | $28.00$25.00 | $35.00 | $60.00 | ||
| W3000 | Round Wearsharp - Better buy design 5/16" thread (nut not included) | .20 | $20$35 | $27.00$35.00 | $35.00 | $70.00 | ||
| D004978 | 24-pack of H3000 teeth | View Photo | 1.80 | $20$35 | $285.00$330.00 | $35.00 | $365.00 | |
| D002039 | 24-pack of G3000 GreenTeeth® | View Photo | 2.00 | $20$35 | $625.00$475.00 | $35.00 | $510.00 | |
| D004930 | 24-pack of W3000 Wearsharp | View Photo | 2.40 | $20$35 | $595.00$465.00 | $35.00 | $500.00 | |
| D001625 | 3/8" Standard Lock Nut for Round Teeth | View Photo | .30 | $20$35 | $2.70$2.50 | $35.00 | $37.50 | |
| D001678 | Shim for Round Teeth | View Photo | .01 | $20$35 | $1.50$1.50 | $35.00 | $36.50 | |
| D005084 | 300 Series Round Tooth Holder - Angled Baumalight | View Photo | 1.00 | $20$35 | $12.96$19.00 | $35.00 | $54.00 | |
| D001679 | 300 Series Round Tooth Holder - Angled 700LP-A Green | View Photo | 1.00 | $20$35 | $28.00$25.00 | $35.00 | $60.00 | |
| D002741 | 300 Series Round Tooth Holder - Straight | View Photo | 1.00 | $20$35 | $24.00$20.00 | $35.00 | $55.00 | |
| D001775 | 5/8" Bolt for Round Tooth Holder | View Photo | .50 | $20$35 | $3.95$5.50 | $35.00 | $40.50 | |
| D001676 | Inner (weld-on) Plate for Outer Round Tooth Holder (Mulchers) | View Photo | 1.20 | $20$35 | $15.50$18.50 | $35.00 | $53.50 | |
| D002494 | 4-tooth, GXM530 and HGW30 holder (AR400) | View Photo | 2.60 | $20$35 | $125.00$125.00 | $35.00 | $160.00 | |
| D005501 | 3-tooth, GXM530 and HGW30 holder (AR400) | View Photo | 2.40 | $20$35 | $85.00$90.00 | $35.00 | $125.00 | |
| D005118 | 1/2” x 4.5” Allen bolt (for above) | View Photo | .40 | $20$35 | $9.00$10.50 | $35.00 | $45.50 | |
| D002169 | 5-tooth, GXM550, GXM750 & S40 (AR400) | View Photo | 3.60 | $20$35 | $195.00$165.00 | $35.00 | $200.00 | |
| D003148 | 3-tooth, GXM550, GXM750 & S40 (AR400) | View Photo | 3.20 | $20$35 | $45.00$45.00 | $35.00 | $80.00 | |
| D002930 | 5/8" x 4.5" Allen Bolt (for above) | View Photo | .44 | $20$35 | $8.00$6.75 | $35.00 | $41.75 | |
| D001773 | 5/8" fine stover lock nut for P5000 tooth | View Photo | .06 | $20$35 | $3.50$3.00 | $35.00 | $38.00 | |
| D005079 | 5/16" Standard Lock Nut for round teeth | View Photo | .05 | $20$35 | $5.00$4.00 | $35.00 | $39.00 |
Stump Grinder Tooth - 5/8" Fine Thread - 3/4" Square
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| S1000 | Stump Grinder Tooth - 5/8" Fine Thread - 3/4" Square | .40 | $20$35 | $16.50$17.00 | $35.00 | $52.00 | ||
| D001627 | 24-Pack of S1000 teeth | View Photo | 8.00 | $20$35 | $295.00$285.00 | $35.00 | $320.00 | |
| D001773 | 5/8" fine stover lock nut for S1000 tooth | View Photo | .06 | $20$35 | $3.50$3.00 | $35.00 | $38.00 | |
| D002121 | 52 Pack of 5/8" fine nut for S1000 tooth | View Photo | 6.00 | $20$35 | $108.00$86.40 | $35.00 | $121.40 | |
| D002924 | Tooth holder block for S1000 tooth (weld-in) | View Photo | .40 | $20$35 | $7.00$6.00 | $35.00 | $41.00 |
500 Series Planer Mulcher Tooth with 5/8" shank
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| P5000 | 500 Series Planer Mulcher Tooth | .40 | $20$35 | $17.50$17.50 | $35.00 | $52.50 | ||
| D001774 | 24-Pack of 500 series planer teeth | View Photo | 8.00 | $20$35 | $320.00$295.00 | $35.00 | $330.00 | |
| D005799 | 500 series weld-on tooth holder (D001343) | 1.80 | $20$35 | $34.50$25.00 | $35.00 | $60.00 | ||
| D001773 | 5/8" fine stover lock nut for P5000 tooth | View Photo | .06 | $20$35 | $3.50$3.00 | $35.00 | $38.00 |
500 Series Ripper Mulcher Tooth with 5/8" shank
All units shipped with Standard P5000 Series Planer Teeth only and ripper teeth can be installed as the planer teeth need replacing. Units can be operated with a mix of Planer and Ripper teeth.
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| R5000 | 500 Series Ripper Mulcher Tooth | .33 | $20$35 | $20.00$22.00 | $35.00 | $57.00 | ||
| D002330 | 24-Pack of 500 series ripper teeth | View Photo | 8.00 | $20$35 | $450.00$450.00 | $35.00 | $485.00 |
700 Series Planer Mulcher Tooth
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| P7000 | 700 Series Planer Mulcher Tooth | 1.20 | $20$35 | $95.00$120.00 | $35.00 | $155.00 | ||
| D002267 | 30 Pack of P7000 series planer mulcher teeth | View Photo | 30.00 | $35$75 | $2,695.00$2,985.00 | $75.00 | 3,060.00 | |
| D001776 | Bolt for 700 series mulcher tooth (5/8" fine thread x 3") | View Photo | .30 | $20$35 | $9.80$8.30 | $35.00 | $43.30 | |
| D002269 | 75 Pack of bolts for 700 series mulcher teeth (5/8" fine thread x 3") | View Photo | 10.00 | $20$35 | $450.00$440.00 | $35.00 | $475.00 | |
| D001671 | Tooth holder for 700 series tooth (weld-on) | View Photo | 3.00 | $20$35 | $91.80$91.80 | $35.00 | $126.80 | |
| D003950 | Disc mulcher tooth holder - down angle | View Photo | 4.40 | $20$35 | $125.00$125.00 | $35.00 | $160.00 | |
| D002836 | Disc mulcher tooth holder – top | View Photo | 5.20 | $20$35 | $85.60$85.60 | $35.00 | $120.60 | |
| D002837 | Disc mulcher tooth holder – straight | View Photo | 3.20 | $20$35 | $88.00$88.00 | $35.00 | $123.00 | |
| D002860 | Disc mulcher tooth holder – bottom | View Photo | 6.80 | $20$35 | $250.00$240.00 | $35.00 | $275.00 |
700 Series Ripper Mulcher Tooth
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| R7000 | 700 Series Ripper Mulcher Tooth | 1.00 | $20$35 | $45.00$95.00 | $35.00 | $130.00 | ||
| D002268 | 30 pack of R7000 series ripper mulcher teeth | View Photo | 30.00 | $35$75 | $1,250.00$1,550.00 | $75.00 | 1,625.00 | |
| D001776 | Bolt for 700 series mulcher tooth (5/8" fine thread x 3") | View Photo | .30 | $20$35 | $9.80$8.30 | $35.00 | $43.30 | |
| D002269 | 75 pack of bolts for 700 series mulcher teeth (5/8" fine thread x 3") | View Photo | 10.00 | $20$35 | $450.00$440.00 | $35.00 | $475.00 | |
| D001671 | Tooth holder for 700 series tooth (weld-on) | View Photo | 3.00 | $20$35 | $91.80$91.80 | $35.00 | $126.80 | |
| D003950 | Disc mulcher tooth holder - down angle | View Photo | 4.40 | $20$35 | $125.00$125.00 | $35.00 | $160.00 | |
| D002836 | Disc mulcher tooth holder – top | View Photo | 5.20 | $20$35 | $85.60$85.60 | $35.00 | $120.60 | |
| D002837 | Disc mulcher tooth holder – straight | View Photo | 3.20 | $20$35 | $88.00$88.00 | $35.00 | $123.00 | |
| D002860 | Disc mulcher tooth holder – bottom | View Photo | 6.80 | $20$35 | $250.00$240.00 | $35.00 | $275.00 |
Unique to these teeth is the cup and cone mount. Machined into the holder and forged into the teeth. Engineered to take most of the strain off the mounting bolt eliminating shearing forces.
Unique to these teeth is the cup and cone mount. Machined into the holder and forged into the teeth. Engineered to take most of the strain off the mounting bolt eliminating shearing forces.
900 Series Bolt-on Planer Tip Tooth
Shown with holder
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| T9000 | 900 Series Bolt-on Planer Tip Tooth | 1.20 | $20$35 | $35.00$50.00 | $35.00 | $85.00 | ||
| D004929 | Bolt to bolt-on T9000 tip (M14 x 1.5 x 35) | View Photo | .12 | $20$35 | $6.50$6.50 | $35.00 | $41.50 | |
| D004728 | Bolt-on sub-holder for T9000 tip | View Photo | 2.20 | $20$35 | $57.00$75.00 | $35.00 | $110.00 | |
| D004928 | Bolt for 900 series mulcher tooth (M20-1.5 x 60) also for D004728 | View Photo | .40 | $20$35 | $10.50$8.00 | $35.00 | $43.00 |
900 Series Ripper Mulcher Tooth
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| R9000 | 900 Series Ripper Mulcher Tooth | 3.40 | $20$35 | $82.00$95.00 | $35.00 | $130.00 | ||
| D006016 | 12 - Pack of R9000 Series Ripper Mulcher Teeth | 44.00 | $45$95 | $945.00$980.00 | $95.00 | 1,075.00 | ||
| D004427 | Tooth holder for 900 series tooth (weld-on) | View Photo | 6.00 | $20$35 | $43.17$49.65 | $35.00 | $84.65 | |
| D004928 | Bolt for 900 series mulcher tooth (M20-1.5 x 60) also for D004728 | View Photo | .40 | $20$35 | $10.50$8.00 | $35.00 | $43.00 |
11000 Series Planer Mulcher Tooth
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| P11000 | 1100 Series Planer Mulcher Tooth | 3.00 | $20$35 | $45.00$48.00 | $35.00 | $83.00 | ||
| D004861 | 12-Pack of 1100 Series Planer Mulcher Teeth | View Photo | 35.50 | $38$85 | $450.00$498.00 | $85.00 | $583.00 | |
| D003971 | Sharpening pitch gauge | View Photo | .40 | $20$35 | $18.00$16.00 | $35.00 | $51.00 | |
| D004928 | Bolt for 900 series mulcher tooth (M20-1.5 x 60) also for D004728 | View Photo | .40 | $20$35 | $10.50$8.00 | $35.00 | $43.00 | |
| D004427 | Tooth holder for 900 series tooth (weld-on) | View Photo | 6.00 | $20$35 | $43.17$49.65 | $35.00 | $84.65 |
Beaver Planer Tooth for Tree Saws
Shown with holder, not included in PRICE (USD) of tooth.
| PART NUMBER | DESCRIPTION | WEIGHT | SHIPPING | PRICE (USD) |
SHIPPING/ TARIFF |
TOTAL (USD) | ||
|---|---|---|---|---|---|---|---|---|
| B8000 | Beaver Planer Tooth for Tree Saws | .40 | $20$35 | $27.00$40.00 | $35.00 | $75.00 | ||
| D006882 | 8 Pack B8000 tooth pack | View Photo | 2.60 | $20$35 | $150.00$225.00 | $35.00 | $260.00 | |
| D005185 | 3/8"x 2-1/4" Coarse Thread Bolt- Grade 8 | View Photo | .10 | $20$35 | $6.00$4.87 | $35.00 | $39.87 | |
| D004261 | Tooth holder for B8000 series tooth | View Photo | 1.50 | $20$35 | $112.26$129.10 | $35.00 | $164.10 | |
| D005778 | 1" x 3/8-24 Hex drive cap screw | View Photo | .05 | $20$35 | $4.50$5.80 | $35.00 | $40.80 | |
| D004487 | B8000 Beaver Tooth Sleeve Head 3/4'' ID | View Photo | .05 | $20$35 | $12.50$9.00 | $35.00 | $44.00 | |
| D004488 | B8000 Beaver Tooth Sleeve Threaded 3/8-24 x 3/4'' ID | View Photo | .07 | $20$35 | $12.75$10.00 | $35.00 | $45.00 |
Price is not set for this Part Number. Contact Baumalight for more information.
Please Contact Baumalight Sales to set up the item's weight
CANADA
UNITED STATES
OVERSEAS USD