DXM530 Rotating Tree Saw for Excavator

SOLD BY EQUIPMENT DEALERS

All Baumalight products are sold through our network of equipment dealers. For you, this means better product support, after-sales service, maintenance and product warranty from your local, trusted dealership Click here to find a local dealer.

An exception is that we sell directly to Equipment Rental Stores of most sizes. Click here for more info.

SERVICE AND INSTRUCTIONAL VIDEOS & RIGHT TO REPAIR

Baumalight offers customers a series of helpful service & instructional videos and supports the right to repair. These videos show you how to perform your own trouble shooting and repairs which can save you a lot of down time because many things can be fixed on the spot by end users. Also, after the warranty period is over, a lot of money can be saved if you can do things yourself following simple instructions on trouble shooting, maintenance and repairs.

CLICK THE VIDEO TO LEARN MORE

MANUAL ROTATING CUTTING HEAD

Effectively switch from horizontal tree cutting position to vertical trimming and limbing position with the 90 degree manual rotating head. Simply remove the 4 bolts at the base of the cutting head, rotate the unit 90 degrees to the left or right and then secure the bolts. CLICK HERE TO WATCH VIDEO

HEAVY DUTY BUILD

The tree saw’s durable design and quality materials combine to create a saw that is able to stand up to the demanding work of cutting limbs and trees.

BLADE MOUNTED ON HEAVY DUTY BEARING SUPPORT

The tree saw's blade is mounted on an overhung load adapter, which is designed with tapered roller bearings and built to stand up to the rigors of sawing limbs and trees. The overhung load adapter keeps the blade spinning in the toughest trimming conditions.

SAW BLADE SHIELDING

The durable shield encloses the blade for protection, directing the chips as it easily cuts through limbs and trees.

DESIGNED FOR MAXIMUM VISIBILITY

Making sure you have the best seat in the house, the tree saw was designed with maximum visibility in mind, allowing you to make cleaner and better cuts.

EASY ACCESS PANELS FOR SERVICE

Built for the long haul, the tree saw has multiple removable panels for easier access and servicing.

CLEAN CUTS

The tree saw makes clean work of limbing and trimming trees safely and quickly, leaving pruned trees with a clean cut.

BETTER ACCESS

Excavators can also go where tractors and skid steers cannot, giving you and your tree saw access to areas that had to be cleared by hand in the past. Now you can quickly and cleanly trim, limb and cut more efficiently than before.

BOLT-ON EXCAVATOR ADAPTOR

Our bolt-on mounting adaptors provide strength and future flexibility. If needed, your tree saw can easily be bolted to another adaptor to mount to your new excavator.

AVAILABLE WITH GEAR MOTOR OR BENT AXIS PISTON MOTOR

Gear motors are a good cost effectvie choice for the average user and our Industry leading bent axis piston motors make the most efficient use of your hydraulic flow and pressure for pruning, trimming and land clearing. Built to last, these reliable motors can double the power of your output flow.

CASE DRAIN – VENT TO ATMOSPHERE

To prevent pressure relief activation on the motor seal, the DXA530 comes with a case drain line and a vent to atmosphere relief valve. In the event there is a spike in pressure in your hydraulic lines, the case drain will relieve the pressure and drain it back into the return line and back to the tank. If the connection of the case drain (third line) is missed or if the line is blocked, then the case drain will vent to notify you. A properly installed case drain protected by a vent to atmosphere relief valve will save the work of replacing your shaft seal and save you from down time of unexpected maintenance. To learn more CLICK HERE about the case drain line.

PROTECTIVE POWDER COAT FINISH

Heavy duty construction and a durable powder coated finish.

FRONT PUSH BAR

A solid serrated steel plate up front helps guide limbs, branches and small trees safely away from the operator.

INTERNAL HOSE ROUTING

All of the hydraulic hoses on the DropSaw are sleeved for operator and hose protection while the connecting hoses are sleeved and wrapped in hose armour for double protection. The hoses are then routed internally, keeping them out of harm’s way. The DropSaw also features a pivoting arm with a greaseable pin keeping the slack out of the way which protects the hoses from dangerous pinching and strain.

AR400 STEEL BLADE

The tree saw’s heavy duty circular blade is designed and shaped from AR-400 steel. This abrasion resistant steel is rugged and ready for the abuse of a long service life.

6 FREE TEETH

All DXM530 Tree saw comes with a free set of 6 replacement teeth. These replacement teeth are conveniently shipped in a robust enclosed compartment on top of the frame.

HIGH SPEED TEETH

The concave shaped carbide tip of our High Speed Teeth provide aggressive cutting action by chipping the brush bit by bit. This round tooth is 3 teeth in 1. Simply loosen the lock nut and rotate the tooth to a fresh, sharp cutting edge. This can be done three times, extending the life of each tooth.

EASY TEETH CHANGING

The high speed teeth design allows for easy rotation and changing of the teeth as needed.