MP360 Fixed Tooth Mulcher for Power Take Off on a Tractor

The 300 series is our most light weight fixed tooth brush mulcher for 3-point hitch tractors. With low ground speed the MP360 brush mulcher will efficiently cut heavy vegetation and light brush using high speed teeth. The concave shaped carbide tip provides aggressive brush mulching action by chipping the brush bit by bit. Part of the secret of their performance is the ease of rotating the teeth so there is always a sharp edge to make mulching easier.
The direct drive of a brush mulcher on the PTO of a tractor is the most efficient way to run a brush mulcher and if you check our brush cutting size charts you will see that the slower you can travel the bigger material you can handle.

Free Teeth Promo

Down below are photos and video footage taken by Baumalight product owners. Visit our Factory Discount web page to learn how you too can participate in this media discount program.


CUSTOMER PHOTOS



Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of cutters 60 74 92 112 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility Yes Yes No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540 (Max Engine HP 110) 540 (Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes
Model No. MP348 MP360 MP560 MP572 MP972 Large Shaft to up the HP
Path Width 60" 72" 75" 87" 84" D002134
Rotor Width 48" 60" 60" 72" 72"
Maximum Engine HP 50 55 75 125 135 90 - 155 PTO Hp
Maximum PTO HP 40 45 65 115 125 Do not exceed 165 Engine Hp
Minimum Engine HP 25 30 45 50 90
Cutting Depth Level Level 1.5" Above to 1" Below Grade 1.5" Above to 1" Below Grade Level to 2" Below Grade
Cutting Style High Speed Teeth High Speed Teeth Carbide Tipped Bolt In Carbide Tipped Bolt In Double Tipped
Tooth Part number H3000 H3000 P5000 P5000 R9000
Number of cutters 60 74 92 112 43
Rotor Shaft Size 2" 2" 2" 2" 2"
Rotor Diameter (tool tips) 15" 15" 15" 15" 18.5"
Rotor Weight (with tools) 230 lbs 315 lbs 575 lbs 700 lbs 1,105 lbs
Hitch Size CAT 1 CAT 1 CAT 2 CAT 2 CAT 2 or 3
Quick hitch compatibility Yes Yes No No No No
Drive Speed 540 540 540 1,000 1,000
Drive Speed Options 540 (Max Engine HP 110) 540 (Max Engine HP 110)
Gearbox Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8"
Tractor End Spline Size 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1-3/8" 1.75" 20 -spline
System Protection Slip Clutch Slip Clutch Slip Clutch Slip Clutch Slip Clutch
Unit Weight 1050 lbs 1200 lbs 2145 lbs 2500 lbs 3200 lbs
Hydraulic Requirements Not Applicable Not Applicable 1 Remote 1 Remote 2 Remotes

MAXIMUM BRUSH CUTTING SIZES

(Brush Diameter in Inches)

300 Series

MODEL TRACTOR SPEED RPM 25 HP 30 HP 40 HP 55 HP
300 Series
Low Gear Slow Reverse 1800 0.5" 1" 1.5" 2"
Low Gear Stop & Chew 1" 1.5" 2" 2.5"
Hydrostatic Slow Reverse 1.5" 2" 2.5" 3"
Hydrostatic Stop & Chew 2" 3" 4" 5"

500 Series

MODEL TRACTOR SPEED RPM 45 HP 50 HP 60 HP 65 HP 68 HP 75 HP 100 HP 125 HP
MP560 Low Gear
Creeper
Hydrostatic
1800 1"
2"
3"
1.5"
2.5"
4"
2"
3"
5"
--
--
--
2.5"
4"
6"
--
--
--
--
--
--
--
--
--
MP572 Low Gear
Creeper
Hydrostatic
1800 --
--
--
--
--
--
--
--
--
2.5"
4"
6"
--
--
--
3"
5"
8"
3.5"
6"
10"
4"
7"
12"

900 Series

MODEL TRACTOR SPEED RPM 100 HP 125 HP 150 HP
MP972 Low Gear
Creeper
Hydrostatic
1800 7"
9"
13"
9"
10"
15"
10"
12"
17"
Factory discount logo
PRE-PRODUCTION TESTING
PRE-PRODUCTION
TESTING
Media
MEDIA
Floor/Demo Models
FLOOR/DEMO
MODELS

MODEL DISCOUNT CATEGORY LOCATION DESCRIPTION
*OFFERS INCLUDE FREE FREIGHT TO DEALER

PRODUCT DETAILS




PRE-PRODUCTION TESTING

Test our pre-production and prototype models for deep discounts by giving us all the necessary feedback to make sure these models meet the requirements demanded in the field. No Warranty can be provided on labour but you'll receive deep discounts through our dealer network as well as a 1 year warranty on parts* only. Baumalight understands this is not for everyone, but our discount program offers many benefits and we look forward to providing full warranty versions in the future once all product testing has been completed.

*Warranty labour must be performed by end user with no further compensation other than the deep discount off the original purchase price.


MEDIA

With any purchase from the following list you'll have the opportunity to work with our marketing agency to obtain photos and video footage for additional discounts or if you are located farther away we give a lesser discount for high definition pictures and video footage as well.


DEMO/FLOOR MODELS

Be sure to inquire about our many showroom floor,light demonstrator and discounted models
with available deep discounts.


logo
logo

UPCOMING PUBLIC HOLIDAYS

Date Description

Lead time for MP360

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description

Lead time for BRUSH MULCHERS

Model Number Discount Available Lead time to build
first order
Lead time to build
next order
Location Notes Discount Description

PUBLIC HOLIDAYS

Date Description